PS5 Pro Can Reach 120 FPS—Your TV, HDMI Port and Game Must All Support It
A PlayStation 5 Pro can output compatible games at up to 120 frames per second, but connecting it to a 4K television does not guarantee that result. The display must accept a 120 Hz signal at the chosen resolution, the console must use the correct HDMI port and cable, and the game needs its own high-frame-rate mode.
Variable refresh rate, or VRR, is another separate requirement. It helps the television follow changes in the game’s frame rate, reducing tearing and uneven frame pacing. VRR does not turn a 60 fps game into a 120 fps game, and a television can support 120 Hz without supporting the HDMI 2.1 VRR format used by PS5.
Before replacing the television, check what the console already detects. The PS5 video-output screen reports the connected display’s supported resolutions, refresh rates, HDR and VRR capabilities, making it more useful than a logo on the TV box.
Start with the PS5 signal report
Open Settings > Screen and Video > Video Output, then select Information for the Connected HDMI Device. Look for 120 Hz support at the resolution you intend to use and confirm that VRR appears as supported.
A television may accept 120 Hz at 1080p or 1440p but not at 4K. Sony lets you test 1440p output for SDR and HDR at both 60 Hz and 120 Hz, along with VRR. If the display passes that test but not 4K/120, 1440p can provide the smoother mode without forcing the connection back to 1080p.
Leave Resolution on Automatic unless troubleshooting requires a fixed setting. Turn 120 Hz Output on, and set VRR to Automatic for supported games. Sony also offers “Apply to Unsupported Games,” but warns that results vary; disable it if a game behaves unexpectedly.
The correct HDMI port matters
PS5 consoles support HDMI 2.1 and 4K video at 120 Hz. Many televisions, however, provide full bandwidth on only one or two HDMI inputs. Another port on the same TV may stop at 4K/60 even though the specifications advertise 120 Hz.
Connect the console to the HDMI input identified for 4K/120, gaming or HDMI 2.1 in the television manual. Some TVs require an “Enhanced,” “4K Enhanced,” “Input Signal Plus” or similar mode to be enabled for that input. The label varies by manufacturer, so do not assume the fastest mode is active by default.
Use the HDMI cable included with the PS5 Pro or another certified Ultra High Speed HDMI cable rated for 4K/120. A cable can display 4K/60 successfully yet fail, flicker or fall back to a lower resolution when the data rate rises.
For diagnosis, connect the console directly to the display. A receiver, soundbar, HDMI switch or capture device in the middle must also pass 4K/120 and VRR. If the feature appears only with a direct connection, the intermediary device or one of its cables is the bottleneck.
A 120 Hz TV does not promise 120 fps
Refresh rate describes how often the display can update. Frame rate describes how many frames the game and console actually produce. A 120 Hz panel creates room for a game to present up to 120 distinct frames each second; it does not generate those frames for the console.
Sony says compatible PS5 Pro games can run at 60 fps or up to 120 fps while using 4K output, ray tracing and PSSR upscaling. The important word is compatible. Enhancements vary by game, and developers choose how to spend the additional graphics power.
Open the game’s graphics settings after confirming the console output. Look for Performance, High Frame Rate, 120 Hz or a similarly named mode. Some games require 120 Hz support before that option appears. Others target 80, 90 or an unlocked frame rate inside a 120 Hz container rather than holding 120 fps.
High-frame-rate modes can still reduce internal rendering resolution, ray-tracing quality, crowd density or other effects. PSSR can rebuild a sharper image from a lower internal resolution, but results differ by title. Choose the mode after seeing the tradeoff in the specific game, not from the console specification alone.
VRR helps when performance moves
Without VRR, a game that cannot maintain its target may deliver frames out of step with the television’s refresh cycle, causing visible tearing or uneven motion. On an HDMI 2.1 VRR-compatible display, PS5 can synchronize the screen’s refresh rate with the console’s output.
This is especially useful for modes that fluctuate below 120 fps. A game running between fixed targets can feel smoother even though its average frame rate has not increased. The improvement depends on the display’s VRR operating range and the game’s behavior.
Auto Low Latency Mode, or ALLM, is separate again. It asks a compatible television to enter its low-latency game mode. Sony notes that ALLM activates automatically while VRR output is in use. If input feels delayed, confirm that the TV is actually in Game Mode and that motion smoothing is disabled.
Use this checklist before buying another display
Confirm the television’s exact model number and read its manual for 4K/120 and HDMI 2.1 VRR support. Check which physical inputs provide those features. “120 motion rate” and similar marketing terms are not the same as accepting a native 120 Hz signal.
Update the TV firmware and PS5 system software, connect directly with the included cable, enable the television’s enhanced HDMI mode, and check Information for the Connected HDMI Device again. Then enable the high-frame-rate option inside a supported game.
If 4K/120 produces a blank screen or flicker, Sony recommends verifying the port and cable first. The PS5 Video Transfer Rate setting can be reduced to -1 or -2 for troubleshooting, but those settings limit 4K/120 output, so they solve compatibility by giving up the mode you were trying to enable.
PS5 Pro’s extra rendering power is useful on an ordinary 60 Hz 4K television, where enhanced games can combine sharper output and steadier 60 fps performance. A 120 Hz VRR display adds more choices; it is not a requirement for the console to improve games. Buy a new screen for the modes you will actually use, not because 120 appears on a specification sheet.

0 Comments